Skip to content

Category Archives: Design

  1. It has Always been this Way February 3, 2012

    Posted in Design, Safety.

    No comments
  2. Conductor Stranding – IEEE vs IEC Standards January 19, 2012

    Posted in Design, IEC, IEEE, Standards.

    No comments
  3. Explosive Atmospheres – ANSI/ISA/UL/NFPA January 17, 2012

    Posted in IEC, Standards.

    No comments
  4. IEC 60255-152 Measuring relays and protection equipment January 6, 2012

    Posted in IEC, IEEE, Standards.

    No comments
  5. Concept Selection or FEED – The Distinction December 15, 2011

    Posted in Design.

    No comments
  6. IEC 61439-1 Minimum Size for PE, PEN Conductors November 23, 2011

    Posted in Design, IEC.

    No comments
  7. Compliance to Statutory Laws November 18, 2011

    Posted in AS, Design, IEEE, PEC, Standards.

    No comments
  8. Three Elements of Good Engineering Design November 15, 2011

    Posted in Design.

    No comments
  9. GMD, GMR and Waterfall Charts October 7, 2011

    Posted in Design.

    Comments Off
  10. Electrical Protective Devices and Their Applications September 28, 2011

    Posted in AS, Design, Protection.

    Comments Off
  11. Complex MVA Method September 18, 2011

    Posted in Design.

    Comments Off
  12. Coping up With Technology September 4, 2011

    Posted in Design, Economy.

    Comments Off
  13. High Impedance Differential Busbar Protection August 24, 2011

    Posted in Design, Economy.

    Comments Off
  14. PEC Requirement for Ground-Fault Protection August 16, 2011

    Posted in IEC, PEC, Standards.

    Comments Off
  15. IEC 60076-5 Transformer Impedances August 12, 2011

    Posted in AS, Design, IEC, IEEE.

    Comments Off
  16. Transformer K-factor Rating and Variable Speed Drives July 13, 2011

    Posted in Design, Harmonics.

    Comments Off
  17. Identification of Conductors And Terminals – IEC 60445 July 9, 2011

    Posted in Design, IEC, Standards.

    Comments Off
  18. Grounded or Grounding Conductors July 3, 2011

    Posted in Design, IEEE, PEC.

    Comments Off
  19. PEC, NEC, IEC Grounded/Earthed Conductors June 27, 2011

    Posted in AS, Design, IEC, IEEE, PEC, Standards.

    Comments Off
  20. PEC Enforcement – Alternative Methods June 25, 2011

    Posted in Design, IEC, IEEE, PEC, Standards.

    Comments Off
  21. Philippine Electrical Code Annotated June 21, 2011

    Posted in Design, PEC, Standards.

    Comments Off
  22. Performing Better than Early Finish June 17, 2011

    Posted in Design, Life.

    Comments Off
  23. IEC vs AS June 3, 2011

    Posted in AS, Design, IEC.

    Comments Off
  24. Electric Motors Missing May 31, 2011

    Posted in Design, IEC, Standards.

    Comments Off
  25. Knowledge of Procedures Expedites Delivery May 30, 2011

    Posted in Design, Standards.

    Comments Off

Copyright © 2008 - 2012 Ver Pangonilo
The information on this website in may not be reproduced, republished or mirrored on another web page or website without explicit permission from Ver Pangonilo.