Skip to content

Tag Archives: Design

  1. Conductor Stranding – IEEE vs IEC Standards January 19, 2012

    Posted in Design, IEC, IEEE, Standards.

    No comments
  2. Explosive Atmospheres – ANSI/ISA/UL/NFPA January 17, 2012

    Posted in IEC, Standards.

    No comments
  3. Concept Selection or FEED – The Distinction December 15, 2011

    Posted in Design.

    No comments
  4. IEC 61439-1 Minimum Size for PE, PEN Conductors November 23, 2011

    Posted in Design, IEC.

    No comments
  5. Three Elements of Good Engineering Design November 15, 2011

    Posted in Design.

    No comments
  6. GMD, GMR and Waterfall Charts October 7, 2011

    Posted in Design.

    Comments Off
  7. Complex MVA Method September 18, 2011

    Posted in Design.

    Comments Off
  8. High Impedance Differential Busbar Protection August 24, 2011

    Posted in Design, Economy.

    Comments Off
  9. IEC 60076-5 Transformer Impedances August 12, 2011

    Posted in AS, Design, IEC, IEEE.

    Comments Off
  10. Where has the Technorat Gone? August 4, 2011

    Posted in Life.

    Comments Off
  11. PEC Enforcement – Alternative Methods June 25, 2011

    Posted in Design, IEC, IEEE, PEC, Standards.

    Comments Off
  12. When Standards are not readily available May 25, 2011

    Posted in Design, Standards.

    Comments Off
  13. Three Phase Voltage Unbalance – Causes, Effects & Mitigation June 3, 2010

    Posted in Design.

    2 comments
  14. Draft Standards and Liabilities November 30, 2009

    Posted in Design, Standards.

    Comments Off

Copyright © 2008 - 2012 Ver Pangonilo
The information on this website in may not be reproduced, republished or mirrored on another web page or website without explicit permission from Ver Pangonilo.